Coils-LHD-S.p.A.-Telescopic-Forks

Telescopic forks for Coils (steel, fabric and paper)

Particularly for the specific requirements from the metal industry, The LHD Group has develop fitting concepts. In the coil storage the individual coils are stowed away compactly and safely – and yet available at any moment. Telescopic forks allow pick-up and movement of metal coils and are suitable where movement of coils by overhead cranes is not practical.
Another special attention is on engineering design and technical solution, when the metal coil is pick-up at high temperature. A combination of high performance materials are used and act as a thermal barrier to protect the telescopic forks components from excessive heat. Special maintenance, grease and lubrication is also necessary for high temperature environment.

ATENA 100

  • Standard length: from 800 mm to 2800 mm
  • Stroke: from 900 to 3000 mm
  • Load: up to 1.300 kg

ATENA 110

  • Standard length: from 1100 mm to 3000 mm
  • Stroke: from 1200 to 3150 mm
  • Load: up to 1.500 kg

ATENA 130

  • Standard length: from 1200 mm to 3600 mm
  • Stroke: from 1300 to 3750 mm
  • Load: up to 2.000 kg

ATENA 160

  • Standard length: from 1300 mm to 2900 mm
  • Stroke: from 1400 to 3000 mm
  • Load: up to 3.000 kg

ATENA 220

  • Standard length: from 1000 mm to 3000 mm
  • Stroke: from 1100 to 3200 mm
  • Load: up to 5.000 kg

ATENA 183

  • Standard length: from 1500 mm to 3700 mm
  • Stroke: from 1600 to 3800 mm
  • Load: up to 6.000 kg